DATAPATH VisionRGB-E1S DVI/RGB/HD Video Capture Card (PCI Express)
REQUEST A QUOTE
Description
The VisionRGB-E1S DVI/RGB/HD Video Capture Card from DATAPATH is a single channel PCI Express video capture card supporting up to 1920×1080 DVI or 2048×1536 analog resolution. The card captures the Analog/ DVI data and triple buffers it into on-board storage. This data is then copied using DMA to the host system for display, storage or streaming. When a Datapath graphics card is used, the VisionRGB-E1S transfers the data directly to the graphics card, thereby increasing performance. The VisionRGB-E1S sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilizes the hardware and increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E1S sends the data to system memory or direct to the graphics card, dependent on the software used for display.
The VisionRGB-E1S video capture card is supplied with a software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E1S application to automatically detect the video source format and display the captured video in a window on your desktop.
The VisionRGB-E1S is a suitable solution for applications that require the capture of analog or DVI sources in real time, such as viewing Analog or DVI sources from PCs, MACs, industrial/medical equipment, cameras and other video equipment, streaming video applications, and video wall controllers.
* Four lane PCI Express interface with a maximum data rate of 650MB/s
* Maximum analog RGB video capture resolution of 2048 x 1536 x 24 bit
* HD modes using the supplied DVI/Component adapter or DVI/HDMI adapter, HDCP not supported
* On card processor for real time mode and sync detection
* Support for multiple capture cards allowing up to 32 capture channels (32 cards)
* High quality down scaling
* Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8 video formats
* High performance DMA to system memory or direct to graphics memory with scatter gather
* Support for separate H/V sync, Composite sync, or Sync on Green
* 16 cropping windows per capture channel
* Direct DMA driver software and streaming driver
* Includes WDM streaming drivers and the Datapath Vision application software
* Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:
* Dataton WatchOut
* Microsoft Expression Encoder
* VideoLAN VLC
* NorPix StreamPix
* VitualDub
* Adobe Flash Encoder
* VidBlaster
* AMCap and other DirectShow compatible software
* Fully integrated with the Datapath Wall Control-red software for video wall applications
* Optimized for operation with the Datapath range of graphics cards
* Support for Windows XP, Vista, Server 2003, Server 2008, Windows 7, Windows 8, and Linux
* Datapath SDK included for software developers
DATAPATH AM2 Specs | |
Interface Connector | 15-pin Sub-D male, audio breakout cable 16-pin terminal, internal main board |
Connector 1 | 15-pin Sub-D female, audio breakout cable |
Connector 2 | 1 x XLR female, balanced audio left input, 1 x XLR female, balanced audio right input, 1 x RCA female, unbalanced audio left input, 1 x RCA female, unbalanced audio right input, 1 x RCA female, unbalanced audio left output, 1 x RCA female, unbalanced audio right output |
Audio Capture | Selectable analog audio capture between: Stereo Line-In, unbalanced audio capture, connecting to breakout cable RCA connectors Stereo balanced audio capture, connecting to breakout cable XLR connectors |
Sample Rate | 44.1 kHz, 48 kHz, 96 kHz, set as default at 44.1 kHz |
Sample Rate Conversion | 16 bits/sample, 96 dB Dynamic range |
Audio Output | Direct loop through selected analog input |
Operating Systems Supported | Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, Windows 8, Windows Server 2012, and Linux (audio support) |
Software | The audio sources are available in DirectShow and RGBEasy: Sample rate settings accessible through DirectShow and RGBEasy The adjustable attenuation and mute for each channel is available in the audio extension to RGBEasy and in DirectShow |
Power Requirements | 12 ma @ 12 V, supplied via the attached capture cards PCIe interface |
Thermal Dissipation | 150 mW, max |
Temperature | Operating: 32 to 95°F (0 to 35°C) Storage: -4 to 158°F (-20 to 70°C) |
Relative Humidity | 5 - 90%, non-condensing |
Packaging Info | |
Package Weight | 0.4 lb |
Box Dimensions (LxWxH) | 12.7 x 6.5 x 3.4" |
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.Â
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Firstly Print and return this Returns Form to:
30 South Park Avenue, San Francisco, CA 94108, USA
Please remember to ensure that the item you are returning is repackaged with all elements.
For more information, view our full Returns and Exchanges information.