Description

Transmit uncompressed 1080p60 HDMI video over a 5 GHz wireless connection using this Ace 500 TX and 7″ FOCUS 7 Bolt 500 RX Director’s Monitor Bundle from Teradek. This complete wireless transmission system includes Teradek’s Ace 500 wireless transmitter, 7″ FOCUS 7 Bolt 500 RX on-camera monitor with built-in wireless receiver, and accessories for the monitor such as cables, a screen protector, Director monitor handles, and an L-series battery with charger. Read more below about the items in this bundle.

Teradek Ace 500 HDMI Wireless Video Transmitter

With the Teradek Ace 500 HDMI Wireless Video Transmitter you’ll transmit visually lossless, uncompressed 1080p60 signals to one or more Ace 500 receivers with <1 ms latency up to a 500′ line of sight. The Ace 500 is compatible with existing Bolt systems such as the Bolt 500, XT, and LT, as well as SmallHD monitors with integrated Bolt receivers.

The Ace 500 features an HDMI type A input, and a standard HDMI cable is included so you can plug in right out of the box. Power is provided using the included DC barrel to D-Tap power cable for use with a separately available battery or DC power source, or a separately available Sony L-Series, BP-U, BP-9, or Canon LP-E6 battery mount can be purchased. The transmitter unit can be secured to a mount or stand via built-in 1/4″-20 or 4-40 holes.

The transmitter can send the video signal simultaneously to up to four receivers. It features built-in AES-128 encryption that protects your video from prying eyes while your signal stays clean when working within the 5 GHz frequency spectrum. A mini-USB cable is included for upgrading the unit’s firmware.

Zero-Delay Wireless Video
Transmit uncompressed 1080p60 video to receivers up to 500′ away with less than 1 ms of delay.

Bolt Compatibility
Ace 500 transmitters are compatible with all Bolt 500, LT, and XT receivers, as well as integrated wireless SmallHD Bolt monitors.

Reliability
Built with the same reliability and performance as the Bolt, Ace 500 ensures you have a continuous video feed when you need it most.

Receivers
Send video from the transmitter to up to four receivers within a 500′ line of sight.

Mounting Options
The Ace 500 transmitter includes one 1/4-20″ and two 4-40″ mounting holes.

Power Options
The Ace 500 is powered by using a separately available battery or DC power source using the included barrel to D-Tap cable, or by separately available Sony L-Series, BP-U, BP-9, or Canon LP-E6 battery plates attached directly to your transmitter.

SmallHD FOCUS Bolt 500 RX Wireless Monitor

The SmallHD FOCUS Bolt 500 RX Wireless Monitor combines SmallHD’s popular FOCUS monitor with Teradek’s Bolt 500 wireless receiver, all in a single unit. Using the built-in receiver, the Focus Bolt can receive uncompressed 10-bit 4:2:2 HD video from a Teradek Bolt 500, Bolt 500 LT, Bolt 500 XT transmitters, or a SmallHD FOCUS Bolt 500 TX, from up to 500′ away, line-of-sight. Comfortable rubberized handgrips are included along with a neck strap, so you can comfortably hold onto the monitor as you roam around the set. An L-series battery kit for powering the monitor, cable clips, matte and glossy screen protectors, a cleaning cloth, and a micro-HDMI to HDMI adapter are included as well.

Display-wise, the FOCUS Bolt 500 RX is based off the same display and I/O as the well-regarded standard FOCUS models. The 800 cd/m² bright touchscreen 1280 x 720 IPS LCD panel can be viewed in daylight and can be driven by either the single micro-HDMI input or the wireless input. Using the intuitive Swipe OS, you can turn on various monitoring tools like waveform, false color, and vectorscope, as well as focusing aids like peaking, with a tap. If your camera outputs UHD 4K over HDMI, the FOCUS will support that input resolution as well as HD and SD inputs. The wireless input only supports up to HD resolutions. At the rear of the monitor, a single NP-F battery bay accepts the included L-series battery for power.

Swipe OS

Built on SmallHD’s intuitive PageBuilder OS, Swipe OS offers the same intuitiveness of a graphical user interface (GUI), though with touchscreen navigation. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, and focusing aids to up to 12 different “pages”. Using the touchscreen, swipe through different preset pages and toggle monitoring tools on or off with ease.