Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set with Dual Gold Mount Rx
REQUEST A QUOTE
Description
The Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver with dual Gold mount plates, which allow you to pass battery power through the receiver to your monitor. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero latency transmitter/receiver pair features 3000′ line-of-sight transmission distance when used together. You can send and receive visually lossless 3G-video signals from a Bolt 3000 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor.
The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals, in both 50 and 60 Hz standards, as well as 480i and 576i. However, 480p and 576p are only supported via HDMI. You can transmit up to three other receiver models such as the Bolt 3000 XT, Sidekick II, or 703 Bolt 703, and the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes.
Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter
With the Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 3000 receiver with zero latency. The Bolt XT is also compatible with the Sidekick II and 703 Bolt. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4″-20 threaded hole, as well as two M3 threaded holes. The included antennas provide a powerful signal that can travel up to 3000′ line-of-sight.
A shoe mount is included for attaching to cameras without 1/4″-20 threads. For convenience, both a standard BNC cable and HDMI cable are included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers and built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.
* Backward compatible with Teradek’s universal receivers Sidekick II and 703 Bolt, which can receive Bolt 3000 XT signals up to 300′ away
* HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
* SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
* 1/4″-20 and M3 mounting points
Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver with Dual Gold Mount Plates
With the Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver you can receive visually lossless 3G-video or HDMI signals from a Bolt 3000 transmitter with zero latency. The receiver unit itself can be secured via built-in 3/8″-16 M3 threaded holes or the built-in NATO rail. It also includes dual pass-through male and female Gold mount plates that allow you to mount the receiver on a monitor unit and pass the battery power through.
A light stand adapter is included for mounting on stands. For convenience, a standard HDMI cable is included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES-128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.
* The receiver includes built-in cross conversion and Teradek’s proprietary software utilities including a manual frequency selection tool, 3D LUT engine, and a 5 GHz spectrum analyzer to keep an eye on interference in your area.
* The receiver features an HDMI output as well as dual 3G-SDI outputs.
* An integrated NATO rail on the receiver along with several M3 mounting points and an ARRI-compatible 3/8″-16 threaded hole with locating pin holes provide multiple mounting options.
* SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers.
* Five included antennas for the receiver enable it to pick signals up with clarity.
Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter Specs | |
Transmitter | |
Construction | Milled aluminum (chassis) and regulation-compliant PCB |
Video Inputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI type A receptacle |
Video Outputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD, loop through |
Color Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit |
Latency | <0.001 seconds (Tx to Rx without format conversion) |
Supported Resolutions | 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480i: 59.94 576i: 50 |
Video Processing | Compression Visually lossless Color Correction CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color) |
Audio Compression | 48 kHz, 24-bit PCM |
Audio Input | Embedded |
Interfaces | Switches: On/Off and Reset Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows USB Interface Functionality: Upgrade via mini-USB |
Wireless | Non-DFS Frequencies UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz EU & JP: 5.19 to 5.23 GHz DFS Frequencies US: 5.27 to 5.55 GHz and 5.67 GHz EU & JP: 5.27 to 5.67 GHz |
RF Power | 17 dBm EIRP |
Encryption | AES-128 |
Range | Up to 3000' / 914.4 m line of sight |
Unicast Multicast | Unicast / Multicast |
Noise Rejection | Can coexist with WiFi and 5 GHz cordless phones |
Power Input | 2-pin connector 7 to 17 VDC |
Power Consumption | Nominal 7.3 W (measured at 1080p60) |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Mountable | 1 x 1/4"-20 threaded mounting hole 2 x M3 threaded mounting holes |
Dimensions | 0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm |
Weight | 8 oz / 226 g |
Packaging Info | |
Package Weight | 1.66 lb |
Box Dimensions (LxWxH) | 6.7 x 6.6 x 4.8" |
Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver Specs | |
Wireless | |
Wireless Range | 3000' / 914.4 m |
Channel Bandwidth | 40 MHz, 20 MHz |
Frequency Range | Non-DFS Frequencies US, JP, EU: 5.19 to 5.23 GHz US: 5.75 to 5.79 GHz DFS Frequencies US, JP, EU: 5.27 to 5.67 GHz US: 5.27 to 5.55 GHz |
Latency | < 1 ms |
RF Power | 17 dBm |
Wireless Video Compression | Uncompressed |
Interfaces | |
Antenna Ports | 5 x RP-SMA Female |
Video Connectors | 1 x BNC (3G-SDI) Output 1 x HDMI (HDMI 1.4) Output |
Other I/O | 1 x USB Mini-B USB 3.1 Gen 1 Input |
HDCP Support | None |
Embedded Audio | HDMI: 2-Channel SDI: 2-Channel |
Encryption | 128-Bit AES |
Format Support | |
Broadcast System Compatibility | NTSC, PAL |
Video Format | SDI/BNC: 1080p 4:2:2 YCC 8-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080PsF 4:2:2 YCC 8-Bit at 23.98, 24, 25, 29.97, 30 fps 1080i/720p 4:2:2 YCC 8-Bit at 50, 59.94, 60 fps 576i/480i HDMI: 1080p 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080PsF 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30 fps 1080i/720p 4:4:4 RGB 8-Bit at 50, 59.94, 60 fps 576p at 50 fps 480p at 59.94 fps 576i/480i |
Audio Format | 2-Channel 24-Bit 48 kHz PCM Audio |
Timecode | Yes |
LUT Support | 1024 1D LUT 17x17x17 3D LUT |
Display | |
Panel Type | OLED |
Power | |
Built-In Battery | None |
Battery Support | 1 x Gold Mount |
Power Connector | 1 x 2-Pin LEMO (7 to 28 VDC) Input |
Power Consumption | (8.5 W) |
Environmental | |
Operating Temperature | 32 to 104°F / 0 to 40°C |
General | |
Mounting | 1 x M3 Female 1 x 3/8"-16 Female |
Materials | Aluminum, PCB |
Dimensions | 5.43 x 3.5 x 0.94" / 138 x 89 x 24 mm (Without Antennas) |
Weight | 13.26 oz / 376 g (Without Battery Plate) |
Packaging Info | |
Package Weight | 2.45 lb |
Box Dimensions (LxWxH) | 6.7 x 6.5 x 4.8" |
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.Â
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Firstly Print and return this Returns Form to:
30 South Park Avenue, San Francisco, CA 94108, USA
Please remember to ensure that the item you are returning is repackaged with all elements.
For more information, view our full Returns and Exchanges information.