Description

The Bolt 4K MAX Wireless TX/RX Set from Teradek is a wireless transmitter and receiver set designed to transmit and receive signals up to 3000′ away. This kit allows you to transmit uncompressed 4K60 video with less than 1 ms of delay. Each unit comes with a Gold mount battery plate.
The included transmitter can send video signals to six separate receivers, and is compatible with all the Bolt 4K models. It features 12G-SDI, HDMI 2.0, and a 12G-SDI loop-output. The receiver unit features two 12G-SDI and an HDMI 2.0 connector. It also supports HDR workflows, 10-bit 4:2:2 via 12G-SDI, and 8-bit 4:4:4 via HDMI. The set also includes power, HDMI, USB, and SDI cables, two vinyl pouches, and a carry case.

Teradek Bolt 4K MAX 12G-SDI/HDMI Wireless Transmitter (Gold Mount)

Use the Bolt 4K MAX 12G-SDI/HDMI Wireless Transmitter from Teradek with Gold mount battery plate to transmit 4K60 video signals from a 12G-SDI or HDMI input to any Bolt 4K series receiver with less than 1 ms of latency. The transmitter unit can be secured to a camera or other SDI/HDMI video source via a built-in 1/4″-20 threaded hole as well as two M3 threaded holes. The four included antennas provide a powerful signal for up to a 3000′ line of sight, and with the 4K Array Panel antenna you can transmit up to 5000′ line of sight.

The transmitter supports cross conversion from HDMI input to SDI loop output. It also supports HDR workflows, 10-bit 4:2:2 via 12G-SDI, and 8-bit 4:4:4 via HDMI. Its bright LED screen shows current settings and frequencies, and the transmitter can also connect with the Bolt app for iOS via Bluetooth for configuration.

Power can be provided using a Gold mount battery or with the integrated 2-pin connector and included AC adapter. The transmitter supports up to six receivers, and it can operate up to six transmitters in the same area along with Wi-Fi or 5 GHz appliances with the help of the noise rejection feature. It also features a built-in AES-256 encryption with RSA-1024 key exchange.

Also included are four antennas, a D-Tap power cable, a USB cable, an SDI cable, an HDMI cable, and cable cover plates.

* HDMI and 12G-SDI inputs, with 12G-SDI loop-through output
* 3000′ line-of-sight range, 5000′ line-of-sight range with
* separately available 4K Array panel antenna
* Compatible with any Bolt 4K series receiver
* Up to 48 kHz 24-bit PCM embedded audio supported
* SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
* 1/4″-20 and M3 mounting points
* 2-pin LEMO-type power input
* Built-in display with joystick navigation
* Micro-USB port for upgrades

Teradek Bolt 4K MAX 12G-SDI/HDMI Wireless Receiver (Gold Mount)

Use the Bolt 4K MAX 12G-SDI/HDMI Wireless Receiver from Teradek with a Gold mount plate to receive visually lossless 4K60 video signals from any Bolt 4K series transmitter with less than 1 ms of latency and send them out two 12G-SDI outputs or one HDMI output. The receiver unit can be secured to a camera or other SDI/HDMI video source via built-in 1/4″-20 or 3/8″-16 threaded holes. The five included antennas provide a powerful signal that can receive from up to a 3000′ line of sight.

The receiver supports cross conversion from HDMI input to SDI loop output. It also supports HDR workflows, 10-bit 4:22 via 12G-SDI, and 8-bit 4:4:4 via HDMI. Its bright LED screen shows current settings and frequencies, and the transmitter can also connect with the Bolt app for iOS via Bluetooth for configuration.

Power can be provided using the integrated 2-pin connector with the included AC adapter or with a Gold mount battery. A Bolt 4K transmitter supports up to six receivers, and it can operate up to six transmitters with receivers in the same area with Wi-Fi or 5 GHz appliances with the help of the noise rejection feature. It also features built-in AES-256 encryption with RSA-1024 key exchange to protect your video from prying eyes.

* Two 12G-SDI outputs and one HDMI output
* 3000′ line-of-sight range
* Compatible with any Bolt 4K series transmitter
* Up to 48 kHz 24-bit PCM embedded audio supported
* SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
* 1/4″-20 and 3/8″-16 mounting points
* 2-pin LEMO-type power input
* Built-in display with joystick navigation
* Micro-USB port for upgrades